Exemplary Weather and Energy (EWE) Index July 2024

** For Adelaide, the higher than normal Heating energy is a result of the first week being unusually cold at the start of the day (warm up energy) while the higher Cooling energy stems from the warmer temperatures and higher humidity for the rest of the month.

The Exemplary Real Time Year weather files (RTYs), current Reference Meteorological Year files (RMYs) and Ersatz Future Meteorological Years (EFMYs) used for these monthly simulations are available for purchase. This will allow clients to simulate their own designs for energy budgeting and monitoring rather than rely on analogy with the performance of these archetypical buildings and systems. Especially in mild months, small differences in energy consumptions can result in large percentage differences. Solar irradiation data courtesy of Solcast.

Archetypical buildings and systems

10-storey office

3-storey office

Supermarket

5 kW domestic
PV system

Get the Best out of our Interactive Features

This monthly report has been interactive since April 2023.  Once you have scrolled to your city of interest, check out those interactive features and how they work.  Click here to read about the introduction.

  • 1. Choose the energy or peak demand graph to best match your building or system of interest.
  • 2. Choose the weather element graph to best match the sensitivity of your building or system of interest.
  • 3. Mix and match to learn about their relative importance or sensitivity

ADELAIDE

Energy Index (%)

WordPress Data Table Plugin

The solar PV simulation output results were 11.9% higher than the long-term average. The heating peak load was higher than the long-term average for all archetypes (36.0%, 37.5% and 4.0% for 3-storey office, 10-storey office and supermarket respectively). It should be noted that peak load results are highly sensitive to the particular building and HVAC design and settings – it is more appropriate to evaluate those results from a bespoke building model using our RTY data.

Adelaide experienced higher humidity and similar temperatures in July compared to the long-term average. The GHI and wind speed were much lower than the long-term average.

Weather Index

WordPress Data Table Plugin
WordPress Data Table Plugin
WordPress Data Table Plugin


BRISBANE

Energy Index (%)

WordPress Data Table Plugin

The solar PV simulation output results were 2.7% lower than the long-term average. The cooling peak load was 13.8%, 15.1% and 19.9% higher while the heating peak load was 35.6%, 36.2%, and 15.9% lower for the 3-storey office, 10 storey office and supermarket respectively. It should be noted that peak load results are highly sensitive to the particular building and HVAC design and settings – it is more appropriate to evaluate those results from a bespoke building model using our RTY data.

Brisbane experienced comparably warmer and more humid July than the long-term average. The GHI and wind speed were higher than the long-term average.

Weather Index

WordPress Data Table Plugin
WordPress Data Table Plugin
WordPress Data Table Plugin


CANBERRA

Energy Index (%)

WordPress Data Table Plugin

The solar PV simulation output results were 1.7% higher than the long-term average. The heating peak load was 8.8%, and 0.4% lower for the 3-storey office and supermarket while 31.3% higher for 10 storey office respectively. It should be noted that peak load results are highly sensitive to the particular building and HVAC design and settings – it is more appropriate to evaluate those results from a bespoke building model using our RTY data.

Canberra experienced a more humid and warmer July compared to the long-term average. The GHI and wind speed were much higher than the long-term average.

Weather Index

WordPress Data Table Plugin
WordPress Data Table Plugin
WordPress Data Table Plugin


DARWIN

Energy Index (%)

WordPress Data Table Plugin

The solar PV simulation output results were 8.5% lower than the long-term average. The cooling peak load was higher than the long-term average for all archetypes (1.8%, 1.9% and 1.1% for 3-storey office, 10-storey office and supermarket respectively). It should be noted that peak load results are highly sensitive to the particular building and HVAC design and settings – it is more appropriate to evaluate those results from a bespoke building model using our RTY data.

Darwin experienced slighlty higher humidity and similar temperatures in July compare to the long-term average. The GHI and wind speed were lower than the long-term average.

Weather Index

WordPress Data Table Plugin
WordPress Data Table Plugin
WordPress Data Table Plugin


HOBART

Energy Index (%)

WordPress Data Table Plugin

The solar PV simulation output results were 0.2% lower than the long-term average. The heating peak load was 16.3%, and 15.9% higher for the 3-storey office and 10-storey office while 9.6% lower for the supermarket. It should be noted that peak load results are highly sensitive to the particular building and HVAC design and settings – it is more appropriate to evaluate those results from a bespoke building model using our RTY data.

Hobart experienced a slightly more humid and warmer July compared to the long-term average. The GHI was slightly higher while wind speed was lower than the long-term average.

Weather Index

WordPress Data Table Plugin
WordPress Data Table Plugin
WordPress Data Table Plugin


MELBOURNE

Energy Index (%)

WordPress Data Table Plugin

The solar PV simulation output results were 16.0% lower than the long-term average. The heating peak load was higher than the long-term average for all archetypes (103.0%, 90.1% and 13.3% for 3-storey office, 10-storey office and supermarket respectively). It should be noted that peak load results are highly sensitive to the particular building and HVAC design and settings – it is more appropriate to evaluate those results from a bespoke building model using our RTY data.

Melbourne experienced a more humid and slightly cooler July compared to the long-term average. The GHI was much lower than the long-term average.

Weather Index

WordPress Data Table Plugin
WordPress Data Table Plugin
WordPress Data Table Plugin


PERTH

Energy Index (%)

WordPress Data Table Plugin

The solar PV simulation output results were 1.2% lower than the long-term average. Compared to the long term average, the cooling peak load was 34.6%, 80.6 % and 68.9% higher for 3-storey office, 10-storey office and supermarket respectively. It should be noted that peak load results are highly sensitive to the particular building and HVAC design and settings – it is more appropriate to evaluate those results from a bespoke building model using our RTY data.

Perth experienced a more humid and warmer July compared to the long-term average. The GHI was similar while wind speed was much higher than the long-term average.

Weather Index

WordPress Data Table Plugin
WordPress Data Table Plugin
WordPress Data Table Plugin


SYDNEY

Energy Index (%)

WordPress Data Table Plugin

The solar PV simulation output results were 6.0% lower than the long-term average. Compared to the long term average, the heating peak load was 8.5%, 11.1% and 31.1 % lower for 3-storey office, 10-storey office and supermarket respectively. It should be noted that peak load results are highly sensitive to the particular building and HVAC design and settings – it is more appropriate to evaluate those results from a bespoke building model using our RTY data.

Sydney experienced higher humidity and similar temperatures in July compared to the long-term average. The GHI was similar while wind speed was higher than the long-term average.

Weather Index

WordPress Data Table Plugin
WordPress Data Table Plugin
WordPress Data Table Plugin

Examining Perth’s Climate Trends: A Temporal Analysis and the Implications for Building Performance and PV System Simulations

As part of the ongoing investigation into our evolving climate, we routinely process and analyse meteorological data from successive years, conducting comparative assessments to reveal emerging trends and patterns.

Our previous temporal analyses only focused on examining variations in various weather elements. However, in this latest iteration, we have incorporated the results of EnergyPlus simulations, specifically targeting HVAC systems and heating and cooling dynamics within buildings. We have also added the results of System Advisor Model (SAM) photovoltaic (PV) system simulations to enhance the comprehensiveness of our investigation.

The most recent temporal analysis was carried out for all eight capital cities, though this issue of Exemplary Advances will focus on the city of Perth. The findings for Hobart were previously discussed in the July issue of Exemplary Advances. The analysis for other capital cities can be viewed here.

For the analysis of weather elements, we examined the temporal variations in dry bulb temperature, humidity, wind speed, global horizontal irradiation (GHI), direct normal irradiation (DNI), and total precipitation. The analysis involved averaging these elements over three 15-year periods—1990-2004, 2005-2019, and the latest 15-year period from 2009 to 2023—and then comparing the results. A comparison between data from the latest 15 years, the data corresponding to the years and months specified in Industry Standard Meteorological Year (ISMY) files, and the data exclusively from 2023 was also undertaken. ISMYs were originally developed for application in house energy rating software used in NatHERS and derive from historical Bureau of Meteorology (BOM) weather data spanning from 1990 to 2015. Over time, they have become the industry’s de facto standard. It is therefore important to compare against ISMY data, as it provides a reference to gauge alignment with established benchmarks and understand the significance of temporal variations in weather elements.

Comparing 1990-2004 with 2009-2023 showed an increase in Perth’s mean temperature of 0.51°C, a decrease to moisture of 0.62%, and an increase in wind speed of 16.02%. GHI had an increase of 2.58% and DNI had an increase of 1.03%. Meanwhile, comparing 2005-2019 with 2009-2023 showed an increase in the mean temperature of 0.22°C, an increase to moisture of 0.14%, a comparably increase in wind speed of 0.72%, and an increase in GHI and DNI of 0.84% and 0.39%, respectively. The incline in mean temperature, GHI, and DNI for 2005-2019 vs 2009-2023 is likely a result of 2020-2023 experiencing comparatively lower annual average dry bulb temperatures, GHI, and DNI when compared to other years.

Total precipitation in 2009-2023 averaged 11.18% less than in 1990-2004. However, compared to the 2005-2019 period, it saw a 1.63% decrease.

The annual energy consumption trends reveal intriguing patterns across various building archetypes. From 1990 to 2023, all archetypes exhibited increasing trends in both cooling and total energy consumption, with consistent rises during the 15-year periods of 1990-2004 and 2005-2019, but a shift to decreasing trends from 2009 to 2023. In contrast, heating energy consumption generally showed decreasing trends from 1990 to 2023, as well as during the periods of 2005-2019 and 2009-2023, though patterns varied among building types. For instance, 3-storey and 10-storey office buildings experienced increasing trends from 1990 to 2004, while supermarkets showed the opposite, with decreasing trends during the same period. These patterns suggest a warming climate, underscoring the importance of using climate data from the more recent 2009-2023 period in building energy simulations, rather than relying on older ISMY data.

CSIRO weather files for building energy modelling – update

Dear Trevor

We are contacting you because you downloaded one or more of the building energy weather datasets from the CSIRO Data Shop:

There are now updated versions of some of these datasets available in the CSIRO Data Shop:

Projected weather files for building energy modelling

ProjectedWeatherFilesEpw_20240531.zip

Typical Meteorological Year weather files for building energy modelling

TMYWeatherFilesEpw_20240528.zip

The changes made are:

1.       Change in way time mapped from NatHERS to .epw format

2.       Change in how radiation data obtained

3.       User Guide updated to reflect these changes

Change in way time mapped from NatHERS to .epw format

The NatHERS format uses hours 0, 1, 2, 3, …, 23, whereas the EnergyPlus (.epw) format uses hours 1, 2, 3, 4, …, 24

In the previous versions of the datasets in .epw format, when NatHERS data was converted to .epw format, NatHERS hour values were mapped to .epw hour values as follows: 0->1, 1->2, 2->3, …, 23->24.

In the current version of the dataset, when NatHERS data is converted to .epw format, NatHERS hour values are mapped to .epw hour values as follows: 0 not used, 1->1, 2->2, …, 23->23.

For the last hour of each month (.epw hour 24), instead of using a value from the NatHERS RMY dataset (e.g. from hour 0 of the following month), critical variable values have been taken from the third party (non-CSIRO) 2016 TMY dataset. This avoids any potential problems in cases where consecutive months in the RMY/TMY datasets contain data which have been selected from the BOM weather data from different years.

These changes result in a better alignment of variable values with the .epw time period.

Change in how radiation data obtained

In the previous versions of the datasets in .epw format, values for the three radiation variables Global Horizontal Radiation, Direct Normal Radiation, and Diffuse Horizontal Radiation were based on values from the NatHERS RMY files. The current version of this dataset takes these values from the third party (non-CSIRO) 2016 TMY dataset.

The reason for this change is that for the NatHERS RMY files, the radiation values are calculated centred around the hour. For example, radiation at hour 9 relates to radiation for the period 8:30AM to 9:30AM. Whereas the .epw format defines radiation values as relating to the hour preceding the stated hour. For example, radiation at hour 9 relates to radiation for the period 8:00AM to 9:00AM.

The radiation values in the third party (non-CSIRO) 2016 TMY dataset are consistent with the .epw understanding of radiation values.

Regards,

Melissa James

Melissa James

Senior Experimental Scientist

Energy  |  CSIRO 

melissa.james@csiro.au  T  03 9545 2247 

Private Bag 10, Clayton South VIC 3169

Work days Monday-Thursday

CSIRO acknowledges the Traditional Owners of the land, sea and waters, of the area that we live and work on across Australia. We acknowledge their continuing connection to their culture and we pay our respects to their Elders past and present.

The information contained in this email may be confidential or privileged. Any unauthorised use or disclosure is prohibited. If you have received this email in error, please delete it immediately and notify the sender by return email. Thank you. To the extent permitted by law, CSIRO does not represent, warrant and/or guarantee that the integrity of this communication has been maintained or that the communication is free of errors, virus, interception or interference.

CSIRO Australia’s National Science Agency  |  csiro.au

Vale Steven V Szokolay (1927-2024)

Obituary by Don Watson 

The death occurred recently in Brisbane of the eminent architectural scientist, Steve Szokolay, a pioneer and world authority on climatic design. As Vajk Istvan Szokolay[Steven Vajk] (1927‒2024) he was born at Budapest, Hungary, the son of Bela Szokolay, an architect, and Marta Tompa. His parents were active in the Hungarian architecture and arts communities, his father as a painter, adult puppeteer with a political agenda, and founder of an architectural journal Epitomunka, and his mother as an intellectual known for her poetry readings on radio. During World War 2, Steve’s schooling was disrupted. After Russia ‘liberated’ Hungary in 1945 he joined the Communist Party. But by 1947 when he enrolled to study architecture at the Technical University he was disillusioned and resigned, joining instead the Independent Smallholders Party. After winning the 1945 election this Party had been forced into a communist dominated coalition government. Their electoral mandate was eroded by expulsions and imprisonment of party members before a coup d’etat toppled their leader, the democratically elected Prime Minister. Despite the Communists again failing to win the 1947 election, further intimidation soon resulted in a Communist government. 

Only a few months after commencing his University studies, Szokolay was arrested. Charged with conspiring against the State, he was imprisoned for four years. A month after his release in December 1951, he was again arrested and imprisoned for a further two years. Following his release, he became a builder’s labourer and a qualified bricklayer. Continuing his architectural education was not possible and instead he completed second year at a building trades technical college. He married Edith Ditroi in 1955 and his son Tash was born in August 1956, only two months before the Hungarian Uprising, which was crushed 12 days later by the Russians. After narrowly avoiding arrest, Steve and his family fled across the Austrian border. 

Having learnt English in prison, he sought to migrate to an English-speaking country where he could study architecture part-time. Under the Australian Hungarian Refugee Assistance Scheme, the Szokolays arrived in January 1957. After spending time in Bonegilla Migrant Camp, he obtained work in Sydney, briefly as a bricklayer before working as a draftsman, first in an aluminium window factory, then at the Commonwealth Department of Works. He enrolled in the University of NSW’s evening course in architecture, an experience which he described as patchy, but influential staff included Max Collard, Frank Woolard and RO Phillips, who supervised his thesis on Climate control in Sydney office buildings, an early indication of his life-long passion. He graduated in 1961. 

In his final year he was employed by Edwards Madigan & Torzillo before moving in 1962 to Westfields to work on shopping malls. After his first marriage failed he travelled to Europe in 1963. In London he worked for Richard Gallino before he was appointed a tenured lecturer at Liverpool University, conditional on him undertaking a three months’ course at the Architectural Association School in London with Otto Könisberger and working for two years at a new university in Nairobi. He completed a Master of Architecture degree at Liverpool in 1968 with a thesis on Design of buildings for equatorial highland climates

In 1973 with numerous former Hungarians all working in solar control, he attended in Paris the International Solar Energy Society (ISES) conference Sun in the service of Mankind. He maintained contact with Könisberger who later that year ran a conference on tropical architecture which was also attended by Bal Saini, recently appointed professor at the University of Queensland. Subsequently Saini contacted him about working in Brisbane. In July 1974, Szokolay took up a position as senior lecturer and director of the Architectural Science Unit, in the Department of Architecture where in 1978 he completed his PhD degree on Air conditioning in tropical Australia and the role of solar powered methods. He later served as Head of the Department. 

While in the Department, he collaborated with CSIRO and other researchers, undertook research including on historical passive-design precedents, was consultant to government, business and communities, taught and guest lectured at universities and conferences throughout the world and designed an early solar-air-conditioned house. After retiring in 1992 he continued to teach at post-graduate level. He was twice Chairman of ANZSES (1978/80 and 1992/94), a Director of ISES (1985/93), President of the ANZ Architectural Science Association (ANZAScA 1980/82) and President of Passiveand Low Energy Architecture (PLEA) International (1995/98). For four years he edited the journal Solar Progress and was the author of a dozen books including widely used and translated textbooks and some 150 technical papers. He was an Associate of the RIBA and Fellow of the AIA and a member, Fellow and Honorary Life Fellow of numerous national and international Societies and Institutions. In 2001, Steve was awarded a membership of the Order of Australia, a Special Medal of ANZSES, and in celebration of Australia’s bicentenary, a Centenary Medal in recognition of ‘those who made Australia’ for his contributions to education. For architectural science, Steve’s contribution was formidable. His texts on the science of architecture and embracing sustainability are used in architectural education across the globe. His most recent text Introduction to Architectural Science – The Basis of Sustainable Design was published in its third edition in 2014. At the time of his passing, the book is being further updated with a co-author for the UK publisher Routledge. His son Tash who studied architecture predeceased him in 2018, but Steve was survived by his third wife Katalin. They had been married fifty years.

Note by Trevor Lee

Steve’s key design manuals published through the Education Division of the then Royal Australian Institute of Architects are: Climatic Data and its Use in Design 1983, revised 1988, Passive Solar Design in Australia with Jack Greenland 1985 and Thermal Design of Buildings 1995.

Introduction to Architectural Science: The Basis of Sustainable Design book cover

Garry Baverstock, Wise Earth Architects, Perth: Vale Steve Szolkolay…… my old mate!
We had many good and fun times times and a solid connection scientifically.  Such a great man…… self made. The spirit of innovation was with Steve and he always wanted scientific proof as things progressed. I feel the world rarely creates such people these days.

Trevor Berrill, Brisbane: I appreciated the work that Steve did and the opportunity I had to work with him and study his solar energy subjects. Learning from him certainly helped my professional development. I remember working with Ric on the solar water heating test rig, running science tutorials for architecture students, building and showing how to use the low speed wind tunnel, controlled environment room, and artificial sky.

Trevor Lee, Director, Exemplary Energy, Canberra: I remember Steve most clearly as the founding editor of Solar Progress, moving the learned annual Solar Energy Progress in Australia and New Zealand (SEPANZ) to a more accessible quarterly format and expanding its remit to cover social and political developments along with the architecture, engineering and science that had been the exclusive content until then. It was my pleasure to be his successor until December 1994. Less than six months after he joined UQ, Cyclone Tracy devastated Darwin at Christams 1974 and the following year a team of five of Steve’s undergraduate students led by Richard Sale took up a project under Steve’s guidance (at the urging of the Environment Centre of the NT) to explore the autonomous alternatives to simply rebuilding what had been lost. That seminal work was ignored by the government but it led four years later to the establishment of the Darwin Solar Village out of Humpty Doo, well beyond Darwin’s suburban reach.

Monica Oliphant, former ISES President, Adelaide: I was very sad to hear of the death of Dr Steven Szokolay. He played a big part in promoting solar energy in Australia and my memories of him are mostly from the 1980’s and 1990’s. During that time, he helped in the organisation of the ISES Solar World Congress in Budapest in 1993 and was Editor of the ANZSES (Australian and NZ Solar Energy Society) magazine Solar Progress, which he changed to a glossy quarterly publication that was one of the foremost renewable energy magazines in Australia for many years.  Steve was one of the early pioneers of passive solar architecture in Australia and was very passionate about the topic.  He was a “must have” speaker at many ANZSES conferences as he spoke well and was quite outspoken on solar issues. He was a keynote at the ISES Congress in Adelaide in 2001. Unfortunately, I lost touch with him after that but was glad to see references to his papers from time to time. He has a firm place in the early Solar History  of Australia and Architecture in particular and leaves a strong legacy. Steve had a very forthright personality and I liked him very much.

Wasim Saman, Prof Emeritus Engineering, UniSA, Adelaide: Steve was one of a few architects that appreciated the impact of the sun on buildings and could crunch the numbers to evaluate it.
I first met Steve in the 1983 ISES Congress in Perth. He was the technical program chair. I subsequently caught up with him in many ISES and ANZSES meetings including the one in Zimbabwe when we made the successful bid to hold the 2001 ISES Congress in Adelaide. He was always enthusiastic and supportive and left a lasting legacy in Australia and around the world.

Jeff Stapleton, ISES Board Member: I was sorry to hear of the passing of Dr Steve Szokolay, one of the pioneers of Solar Architecture in Australia. In my early career during the 1980’s and 1990’s whenever I attended an ANZSES  conference Steve was always friendly and helpful. He was the author of a number of books on solar architecture and was very active within ANZSES in particular within solar building groups .He was president of ANZSES 1992-to 1994. He will be remembered as a major contributor to the development solar buildings within Australia.